The Dos and Don’ts of Lawn Mower Maintenance

Proper lawn mower maintenance can keep your mower running strong for years. Do sharpen blades regularly, replace air filters, and keep the mower clean. Don’t neglect oil changes or forget to remove old gasoline from the tank.

Introduction: The Importance of Lawn Mower Maintenance

Proper lawn mower maintenance is critical for keeping your outdoor space looking neat and tidy. Not only does routine maintenance help extend the life of your lawn mower, but it also ensures that your machine operates safely and efficiently. In this blog post, we’ll go over some dos and don’ts of lawn mower maintenance to help you keep your equipment in top shape.

The Dos of Lawn Mower Maintenance

Follow these tips to ensure proper lawn mower maintenance:

  • Do keep your blades sharp. Dull blades can damage your turf, leaving uneven patches or causing the grass to turn brown at the tips.

  • Do check and replace spark plugs regularly. Dirty or worn spark plugs can cause difficulty starting your lawn mower or poor overall performance.

  • Do change the oil as recommended by the manufacturer. Clean oil helps reduce engine wear and tear while maintaining proper lubrication.

  • Do adjust tire pressure according to the manufacturer’s recommendations. Properly inflated tires not only improve maneuverability but also prevent uneven cutting and scalping of grass.

  • Do clean debris from under the deck. Clippings left under the deck can quickly accumulate if not removed regularly, leading to clogs that hamper cutting efficiency.

By following these dos of lawn mower maintenance, you can extend the life span of machinery as it remains efficient in operation producing optimal results after every use.

The Don’ts of Lawn Mower Maintenance

Avoid common mistakes when caring for your lawn mower with these don’ts:

  • Don’t forget about air filters. A dirty air filter reduces engine performance and shortens its lifespan.

  • Don’t cut wet grass. Mowing wet lawns increases clumping on the deck which limits airflow required for propulsion alongside exposing operator risks especially slipping. The moisture trapped underneath causes inefficient cutting operations due to th damp nature of garden spaces making them easy places for bacterial growth

  • Don’t change spilt gas with the engine running. This can unsuspectingly put you in fraud risk of spillages or accidents during use.

  • Don’t ignore warning signs. These could be unusual sounds, vibrations or smells and may indicate a more significant issue that requires immediate attention from a professional repair service.

  • Don’t add more oil than necessary. Too much oil can cause carbon buildup, plug spark plugs, and damage our mower’s engine.

What is Lawn mower?

A lawn mower is a machine used for cutting and maintaining grass in lawns, parks, gardens, and other outdoor areas. [Wikipedia]

Do: Keep the Blades Sharp

A well-maintained lawn mower can make a world of difference when it comes to keeping your lawn looking neat and tidy. One of the most important parts of that maintenance is taking care of the blades on your mower. Here’s what you need to know about blade maintenance, why it’s so important and how to go about sharpening them.

Why is Blade Maintenance Important?

Keeping your mower’s blades sharp is essential for a number of reasons. First and foremost, blunt or dull blades will not cut through grass cleanly, which can leave unattractive ragged edges on your lawn. It also puts extra stress on the engine and makes mowing more difficult because you have to make more passes over each section.

Over time, using dull blades on your lawn mower can actually begin to cause harm to your grass. When the grass is ripped instead of being cut cleanly its ability to heal itself is compromised which may open itself up to disease and require extra attention from you in order for it to return back to full health.

Another potential problem with poorly maintained lawn mower blades is comparatively reduced fuel efficiency. Dull blades require significantly more effort from the motor than sharp edges do. By servicing them regularly, you’ll ensure that they are functioning as efficiently as possible which in turn means lower running costs.

Furthermore, by maintaining their condition frequently you’ll avoid having them rust or corrode faster than they should be.

How to Sharpen Blades

Sharpening blades isn’t something that should be done carelessly or ineffectively – if done incorrectly it could lead not just a poor result but also potentially result in accidents where injury occurs due to improper handling of any items related in blade maintenance like files or grinders used when sharpening.

To start off with, it’s best putting on some gloves before commencing work on the equipment so that hand injuries don’t occur while sharpening.Then you should disconnect the spark plug wire from the mower in order to ensure it cannot be accidentally turned on while you’re working on the blades.

Here are a few steps to consider when sharpening lawn mower blades:

  1. You will need to remove the blade off of your lawn mower. This typically requires loosening a few bolts or caps that hold the blade in place before unscrewing them once loosened.
  2. Use a bench grinder, angle grinder, or hand file to refine any dings or nicks that may have developed along edges
  3. Once this process is done and there’s no more roughness left over replace it back onto your lawnmower after making sure that the new bolts or caps are properly tightened in place.

In addition after each sharpening session, you should also wash down your grass cutting equipment thoroughly with clean water and dry everything off completely so as not rust begins appearing over time on metallic surfaces which could shorten their lifespan even further by hastening wear and tear on all such parts which come into contact with them during mowing sessions.

By following these guidelines its entirely avoidable that unnecessary defects develop in functions which were formerly dependable without issue!.

Don’t: Neglect the Air Filter

Lawn mower maintenance is essential to ensuring a long lifespan for your lawn mower. But, with so many different parts that need attention, it can be overwhelming to figure out where to start. One part of your lawn mower that should not be neglected is the air filter. The air filter plays a vital role in keeping your engine running smoothly and efficiently, and neglecting it can lead to costly repairs or even result in permanent damage.

Why is the Air Filter Important?

The air filter on your lawn mower acts as a barrier against dirt, debris, and other contaminants from entering the engine combustion chamber. Without this protective layer, these things can clog up your carburetor and fuel system components such as the fuel injectors, leading to reduced performance of your mower.

If you neglect your air filter over time, it can become clogged with dirt or debris which will restrict airflow needed for engine combustion thus causing performance issues like reduced horsepower or increased fuel consumption.

Eventually, if clogs are severe enough they may also cause overheating or permanent damage in some extreme cases.

Do: Check the Oil and Gas Regularly

If you own a lawnmower, then you already know that routine maintenance is an essential part of keeping it in good condition. One of the most important things you can do for your mower is to check the oil and gas regularly.

Why is Oil and Gas Maintenance Important?

The oil lubricates the engine’s moving parts and helps to cool the engine by reducing friction and dissipating heat. If there isn’t enough oil or if it’s too old, it can lead to increased wear and tear on the engine and possibly even permanent damage.

On the other hand, maintaining proper gas levels ensure that your engine runs efficiently. Old or stale fuel can cause rough starts, poor performance, blockages in the fuel system. Empty tanks are not just inconvenient but can also cause problems starting up down the line when moisture may develop in empty tanks during storage periods.

Proper fueling also ensures optimal oxygen levels allowing complete burning leading to less carbon buildup inside motors which prolongs overall health.

It’s important to remember that faulty maintenance practices often damage parts requiring further repairs or replacements as underestimated safety measures with gasoline are prone to ignition which will lead to numerous hazards each property owner should aim to avoid.

How to Check Oil and Gas Levels

Fortunately, checking your oil levels is a relatively simple process:

  1. Ensure that the mower has cooled down for fifteen minutes if recently turned off
  2. Locate dipstick usually near/with filler cap while taking care not unscrew wrong lid (example air filter)
  3. Wipe down dipstick with a clean cloth removing excess oil which may flatten readings
  4. Insert dipstick back into tube completely then remove again analysing how much fluid sits above

It’s important not only to check if there is any left but also ensure what remains is within optimal ranges recommended by manufacturers – usually found in manuals – helping prevent issues downstream.

Gasoline tanks are almost always located at the rear of a mower, just before the engine. To check gas levels:

  1. Remove cap situated over fuel tank usually with cable or clamp attached after ensuring safety measures have been enabled such as parking brake engaged
  2. Check fuel level gauge if it has one which merely involves looking to see at how much gas remains on display.
  3. If no fuel gauge is present simply use flashlight, lean down and inspect present fuel levels

After checking oil and gas levels, ensure that you replace both caps correctly and securely to avoid potential fire hazards caused by spilled gasoline.

As a rule of thumb, lawnmowers should be refueled every three months during mowing season when being heavily used but still keep an eye out for unusual smells or discolouration as they may be signs your fluid has gone bad needing immediate replacement.

Remembering to maintain adequate oil and gas in your mower will help extend its lifespan by reducing wear on essential components, increasing performance and saving money on costly repairs down the road., So start today: grab your clean cloth, flashlight and check those oil and gas levels to ensure hassle-free maintenance!

Don’t: Skip the Pre-Season Tune-Up

Regular maintenance is very important to ensure that your lawn mower runs smoothly and lasts for years to come. While it may be tempting to just store your mower away at the end of the season, and not think about it again until you need it in the spring, neglecting a pre-season tune-up can result in costly repairs or even complete replacement. Here’s why you shouldn’t skip your pre-season tune-up.

Why is a Tune-Up Important?

A lawn mower is subjected to various seasonal elements, such as dust, dirt, grass clippings, and moisture. This makes regular maintenance essential for optimal performance. As time passes during mowing season, dirt can clog up air filters which reduces airflow and diminishes engine performance. Blades can also become dull after repeated use since they are exposed to debris.

Neglecting necessary repairs will only lead to more problems down the line. For example:

  • Dull blades will tear grass rather than cutting it cleanly.
  • Dirty air filters force engines to work harder than necessary and could damage them entirely in extreme cases.
  • Engines with low oil levels can cause run more inefficiently and seize completely.
  • A poorly running machine will drink fuel faster than efficiently tuned one thereby unnecessarily raising expenses.

By contrast, getting a tune-up at least once every year ensures that any wear-and-tear from the previous season has been resolved before hitting full stride in this year’s summer heat.

What is Included in a Pre-Season Tune-Up?

Most professional service centers offer pre-season services lasting from 90 minutes up to 4 hours depending on their specific checklist items. While some might require additional serivces beyond this list based on initial assessment of customer equipment;

  1. Checkup for signs of engine unusual noises
  2. Replace air filter
  3. Inspect spark plugs; replace if needed
  4. Oil change
  5. Blade sharpening (or replacement)
  6. Check Battery Condition and Charge Level
  7. Fuel filter; change as needed
  8. Inspect belts and replace them if they are worn or damaged.
  9. Basic Carburetor Cleaning, Inspection and Adjustment
  10. Lubricate moving parts.

These steps largely cover the basics however remember that preventative measures will always be worth the it especially since small issues can spiral out of control in your machine, costing much more in repairs down the line!

In addition to thorough checks on all major components listed above, some dealers may include lawn mower pressure washing, targeted battery servicing for ride-on mowers as well as detailing of the equipment at an additional cost for premium treatment.

A pre-season tune-up is a relatively minor expense compared with a repair bill caused by neglecting maintenance tasks throughout the year. A good rule of thumb is to schedule your service before you plan to start mowing season activities so you don’t find yourself sidelined when the perfect spring mowing weather arrives!

Do: Store the Lawn Mower Properly

Proper storage is an essential aspect of lawn mower maintenance. Failing to store your lawn mower adequately can result in damage, corrosion, and a shorter lifespan. Here are a few things you should do to ensure your lawn mower remains in excellent condition when not in use.

Why is Proper Storage Important?

  1. Extend the Lifespan of Your Lawn Mower

    Storing your lawn mower correctly prolongs its life span. More specifically, it helps prevent issues like rusting, corroding that can cause untimely breakdowns.

  2. Save Money on Repairs or Replacement

    A poorly stored lawnmower may require expensive repairs or complete replacement after just a couple of months or years of use. Therefore, proper storage plays a part even when it comes to costs.

  3. Safety Precautions

    Your motor works hard throughout spring and summer while keeping your yard tidy; being clean isn’t enough when storing the equipment: It’s crucial for safety reasons because petrol getting scattered where it’s unnecessary is dangerous, so always make sure to store gas separately from the machine.

How to Store the Lawn Mower
  1. Clean It Up

    Before putting away the lawn mover into storage over winter or any other extended period, spray water using a hosepipe to remove grass clippings and dirt accumulated underneath it; be gentle when doing this not to rinse off vital parts such as air filters since cleaning them with soap might be instrumental leaving them dry before setting it up for winter storage.

A clean lawnmower never rusts hence will remain presentable through time.

  1. Empty Fuel Tank & Oil Reservoir

    Removing fuel from petrol engines prevents deposits and maintain fluidity for future use while preventing damage due to evaporated gases in carburetors that might cause serious malfunctions ultimately rendering moving parts useless when starting up next time round.

Again don’t forget to drain oil from the reservoir, keeping the engine lubricated is crucial; however, considering how fast oil ages leaving it idle for extended periods usually leads to chemical breakdown.

By removing these fluids before storage retention removes obstacles and improves preparing space that the machine would make inside your garage or shed when not in use.

  1. Disconnect Blades or Deck Attachment

    Unhooking mower blades is a smart move since they are prone to getting improper pressure accumulation from bearing down weight during winter storage can ultimately cause warping. You can opt to disconnect deck attachment completely because it makes bladed removal more accessible and puts minimum stress on the engine.

  2. Cover It Up

    While being stored away, lawnmowers can easily catch dust, rainwater heading towards them, snow and other debris degrading parts making it critical as per maintenance hacks always store equipment indoors. Garage-fanatics recommend covering up a milky plastic bin bag which is positioned over the top of your integrated equipment eliminating any risk from compromising weather elements inside damp sheds.(making certain bags fit loosely prevent airlocks that would build up internal humidity moisture)

  3. Choose a Safe Storage Place

    A fundamental thing while storing lawn mowers is where they end up situated when in between uses weather conditions come causing wear and tear after prolonged exposure to sunlight, draft air entering broken windows causing oxidation you name them all — location matters!

  • The Shed – probably best suited place for storages since it’s capacious enough compact in size accommodating most garden tool kits.

  • Inside larger outdoor bins conveniently provide improvised areas enhanced by removable roofs meant for partial self-made roofing via various materials i.e., plastic sheets for those without inclined rooftops aesthetics.

  • A canopy-style shelter work quite well with lawnmower maintenance if already available around other parts needing backup coverage.

When picking out an ideal position go with something least exposed conducive arrangement against natural elements (rainwater H2,O), rodents (small mammals that might gnaw on cables) giving extra attention to safety precautions.

Proper storage is critical for the longevity of your lawn mower, and until you finally appreciate this truth can’t expect remarkable outcomes nor long term maintenance efforts towards equipment relevance. Therefore, do not forget to take all these necessary steps when storing your lawnmower to help extend its life span for the many years yet to come!

Don’t: Overwork or Overuse the Mower

When it comes to maintaining a healthy and lush lawn, a good lawnmower is essential. A well-maintained mower can last for years, but neglecting regular maintenance can cause expensive repairs and replacements. One of the most common mistakes people make when it comes to lawnmower maintenance is overworking or overusing the mower.

Why is Overuse Bad for the Mower?

Overworking or overusing your lawnmower can cause several issues that can be detrimental to its performance and longevity. Here are some reasons why you should avoid overuse:

  • Reduced lifespan: Lawnmowers are not designed to run continuously for extended periods. Overusing them will lead to wear and tear of various components, reducing their lifespan.

  • Dulling blades: When you mow your lawn frequently, the constant friction between the blades and grass will dull them faster than normal usage. Dull blades will not only affect your lawn’s appearance but also put extra stress on your mower’s engine.

  • Overheating: Like all machines, lawnmowers generate heat when they are in operation. Overworking them increases the engine temperature beyond their optimal range, leading to overheating. As a result, essential components like pistons, cylinder walls, and bearings get damaged due to excessive heat.

  • Increased fuel consumption: Overworked engines consume more fuel than they usually do, leading to reduced efficiency and increased running costs.

Tips for Preventing Overuse

Preventing overuse is not an arduous task; following these simple tips can significantly increase your mower’s lifespan:

  1. Follow a mowing schedule: Instead of mowing your lawn whenever you feel like it, stick to a set schedule based on the season. This way allows proper rest periods between trimming sessions while ensuring your lawn doesn’t become unruly.

  2. Set the mowing height: To avoid overworking your lawnmower, adjust its cutting height according to the grass growth. Cutting more than one third of the grass blade off can cause undue stress on the mower and weaken the root system.

  3. Rotate mowing patterns: Change your mowing pattern every session for uniform distribution of stress on different components, giving certain parts like wheels, blades, and deck some rest time.

  4. Clean or replace filters regularly: A clean filter helps an engine run correctly by providing adequate airflow. Always clean or replace filters according to manufacturers’ recommendations to ensure consistent performance.

  5. Sharpen you blades regularly: Dull blades do not cut grass effectively, causing rips and tears that take more energy to heal than even normal wear would. Get a good sharpener or a professional shop to sharpen them 1-2 times per season depending on usage frequency.

  6. Avoid mowing under harsh environmental conditions: Heavy rain, high humidity, and excessively hot weather are all stressful on engines regardless of which brand they are from or power rating they have as it puts extra load on their cooling systems if any at all exists. Waiting for optimal weather conditions prevents problems caused by running in such situations, ensuring your mower lasts longer.

Keeping your lawn mower healthy is essential for maintaining a lush greenery around your home without requiring expensive replacements frequently. Avoiding overuse during operation will help you use standard maintenance practices well enough to avoid major parts breaking down before their intended lifespan ends up coming into play!

Do: Clean the Lawn Mower after Each Use

Taking care of your lawn mower is essential if you want it to last for years and operate effectively. One key part of any lawnmower maintenance program is cleaning. If you don’t already clean your lawn mower after each use, you could be causing damage that shortens its lifespan.

Why is Cleaning Important?

Mowing your lawn creates a lot of debris, including clippings, dirt, and grass. Unfortunately, even with a bagging system in place that catches much of this debris, some will still get stuck to the underside of the deck or in other parts of your lawn mower. Over time, this accumulation can lead to serious issues such as:

  • Rust
  • Corrosion
  • Engine problems
  • Dulling blades
  • Belt failure

Cleaning the mower after every use ensures that all debris has been removed before it has the chance to accumulate and cause these problems.

Aside from preventing potential mechanical hurdles down the line, there are several aesthetic benefits:

  • Regular cleaning gives you an opportunity to inspect the engine and body for any visible dents or scratches.
  • Removing dust and grass buildup can help avoid permanent staining on exterior surfaces.
  • You won’t have bits of grass scattered throughout your garage – which no one likes!
How to Clean the Lawn Mower

Now let’s dig into what steps should be taken when cleaning your lawnmower after each use:

  1. Disconnect Spark Plugs – Anytime you’re working around an engine in any capacity; safety must come first – disconnecting spark plugs will prevent any unwanted accidents from occurring while servicing.

  2. Empty Fuel Tank – It’s essential only ever To clear away fuel before beginning maintenance cycles as flames or sparks from earlier mowing sessions could ignite due to residual fuel sitting within it.

  3. Remove Debris Clumps – Before washing any parts make sure all clumps of debris or dirt are cleared out by scraping with a putty knife or scraper tool.

  4. Hose Down Deck – Whenever possible, use a high-pressure nozzle to direct a steady water stream in one direction while washing the underside of your mower deck thoroughly.

  5. Scrub the Deck – After soaking down any remaining stuck-on debris and leaving it to soak for at least 10-15 minutes, you can proceed to scrub the deck with soap and water or gentle degreaser solutions.

  6. Dry Rotating Parts – Make sure that rotating parts like blades are thoroughly dried before securing back in place; doing so will prevent rust from forming on these surfaces.

  7. Use Lubricants – Finally, use petroleum jelly or a recommended aerosol lubricant to prevent areas prone to rust buildup from corroding over time (such as bolts), and ensure preventative maintenance is regularly conducted.

Conclusion: Tips for Keeping Your Lawn Mower in Top Condition

Maintaining a lawn mower is essential if you want it to perform well and last for years. If you neglect your mower, it will eventually break down and cost you a lot of money to repair or replace. Here are some tips on how to keep your lawn mower in top condition:

  1. Read the Owner’s Manual – One of the most important things you can do is to read the owner’s manual carefully before attempting any maintenance work on your lawn mower. The manual will provide detailed instructions on how to maintain your particular model of lawn mower, including the correct oil type, spark plug gap, and air filter replacement.

  2. Clean After Use – Always clean your lawn mower after use because grass clippings and dirt can build up over time and clog vital components like the air filter or cooling fins. Use a garden hose or leaf blower to remove debris from under the cutting deck and around the engine.

  3. Change Oil Regularly – Changing oil regularly is one of the critical maintenance tasks you need to do to extend the life of your lawn mower’s engine. Most manufacturers recommend changing oil once every 50 hours of operation or at least once per season.

  4. Replace Air Filters – Air filters protect your engine from dust, grass clippings, and other debris that can get sucked into it during operation. Over time, air filters become dirty and less efficient at trapping particles leading to reduced performance or even costly damages.

  5. Check Spark Plugs – Checking spark plugs should be part of regular maintenance too as worn-out spark plugs may cause poor starts, misfires, or decreased fuel economy.can cause poor start-ups, misfires or reduce fuel efficiency drastically just by having them continued

  6. Sharpen Blades Regularly – Sharp blades ensure an even cut across your yard without tearing off grass blades which causes discoloration while making it harder for it to regrow hence making yard appearance unsightly.

  7. Proper Fuel Usage- You need to follow manufacturer’s guidelines on the type of fuel and oil mixtures recommended for your mower, unleaded gasoline with at least octane 87 should be the primary choice.

  8. Store Properly During Off-seasons – During times where you won’t use your lawn mower, ensure that it is stored appropriately; store it in a dry well-ventilated area that is out of children’s reach to prolong its life expectancy.

  9. Don’t Overwork – Avoid overworking, it causes strain on engine reducing performance level while also increasing wear and tear demands, giving rise to costly repairs or replacements.

  10. Use Different mowing patterns – Lastly but not limited to a different mowing pattern every time you mow will reduce wear and tear while maintaining a healthy looking lawn.

Hold little notes like this tip list handy during maintenance so as not to overlook important details like which oil type was used last or blade sharpening schedules have elapsed.

Maintaining your lawnmower should become part of routine house maintenance, considering an investment like getting new gas filters or adding stable additives which help extend fuel shelf life can be all the difference between using up precious resources during an emergency when required or needing professional assistance from regular breakdowns caused by lack of maintenance attention and poor handling practices.

Taking good care of your licensed vehicle could life long daily usage with efficient services rendered with these tips in mind!

Scroll to Top